Post by founder on Aug 14, 2009 0:25:04 GMT -5
Radio Shack Hack for model 12-587 -
1. Take 3 screws out of the back of the radio. 1 is in the back and 2 are in the battery compartment.
2. Open up the radio and you will see the circuit boards. Take the 3 screws out that are holding the top board to the bottom board.
3. Once screws have been removed, separate the two board by gently pulling them apart.
4. The bottom board should now be exposed and you will see a row of pins at the bottom where it once plugged into the other board.
5. Locate the pin at the very bottom left and bend it back.
6. Re-assemble the boards back together and close the box. Putting the screws back into the circuit board is unnecessary. Just leave them out, the cover will make sure that the boards do not move.
Posted by Unidentified Frequency Oscillations Magazine at 6:41 AM
Labels: radio shack hack ghost box 12-587 12-469 12-470 franks spirit modification sweeping linear frequency
1. Take 3 screws out of the back of the radio. 1 is in the back and 2 are in the battery compartment.
2. Open up the radio and you will see the circuit boards. Take the 3 screws out that are holding the top board to the bottom board.
3. Once screws have been removed, separate the two board by gently pulling them apart.
4. The bottom board should now be exposed and you will see a row of pins at the bottom where it once plugged into the other board.
5. Locate the pin at the very bottom left and bend it back.
6. Re-assemble the boards back together and close the box. Putting the screws back into the circuit board is unnecessary. Just leave them out, the cover will make sure that the boards do not move.
Posted by Unidentified Frequency Oscillations Magazine at 6:41 AM
Labels: radio shack hack ghost box 12-587 12-469 12-470 franks spirit modification sweeping linear frequency
